Mosaic sheets and standard wet saw trays don't play well together.
The sheet flexes. Individual pieces sag. And as you push the material through the blade, those small pieces can get pushed down into the factory channel instead of staying flat and supported.
So installers improvise.
Scrap tile. Cardboard. Foam board. Backer board.
Whatever creates a flat surface across the tray.
ZeroDeck™ eliminates the workaround.
ZeroDeck creates a flat, continuous, zero-clearance cutting surface across your RIDGID wet saw tray, supporting mosaic sheets right up to the blade so the material stays flat and controlled throughout the cut.
Snap it in. Leave it in. Keep cutting.
FLAT SURFACE. ZERO CLEARANCE. BETTER CONTROL.
Flat, Continuous Support — Gives flexible mosaic sheets a solid surface to rest on throughout the cut.
Zero Clearance at the Blade — Supports individual mosaic pieces right up to the blade instead of allowing them to sag into the factory channel.
More Accurate Mosaic Cutting — Keeping the sheet flat and supported gives you better control throughout the cut.
Eliminates Makeshift Workarounds — No more scrap tile, cardboard, foam board or backer board covering your saw tray.
Leave It Installed — ZeroDeck can stay in your saw, ready whenever you need it.
Works With Any Size Tile — Keep ZeroDeck installed when cutting mosaics, small-format tile or larger everyday tile.
Supports Small Pieces & Thin Rips — The zero-clearance surface also helps prevent small cuts and narrow pieces from dropping or being pushed into the blade channel.
No Permanent Modification — Installs without permanently modifying your wet saw.
Standard wet saw trays need clearance around the blade.
That's usually not a problem when you're cutting a solid piece of tile.
Mosaic sheets are different.
Because the individual pieces are connected by mesh or backing, the sheet can flex over the factory opening. Individual pieces can tilt, sag or get pushed down into that channel as the blade passes through.
ZeroDeck fills that unsupported area and creates a flat cutting surface right up to the blade.
The mosaic stays supported.
The blade does the cutting.
If you've ever laid a piece of scrap tile, foam board, cardboard or backer board across your wet saw just to cut a mosaic sheet...
You already understand why ZeroDeck exists.
We just turned the workaround into an actual tool.
ZeroDeck isn't another jig you need to set up every time you make a cut.
Install the correct ZeroDeck for your RIDGID wet saw and leave it there.
Cutting mosaics? They're supported.
Cutting small pieces? They're supported.
Back to regular tile? Keep cutting.
No repeated setup.
No hunting for scrap material.
No rebuilding your cutting surface every time mosaics show up on the job.
Mosaic sheets
Porcelain mosaics
Ceramic mosaics
Glass mosaics
Stone mosaics
Penny tile
Small-format tile
Thin rips
Small cut pieces
Everyday wet-saw cutting
ZeroDeck™ is available for:
RIDGID 7" Wet Saw
RIDGID 10" Wet Saw
IMPORTANT: ZeroDeck Inserts are saw-specific. Select the version designed for your exact RIDGID wet saw before ordering.
Product: ZeroDeck™
Compatibility: Select RIDGID 7" or RIDGID 10" Wet Saw
Type: Zero-clearance wet saw tray insert
Primary Application: Supporting mosaic sheets during wet-saw cutting
Secondary Applications: Small tile, thin rips and small cut pieces
Installation: Tool-free
Permanent Saw Modification: None
Can Remain Installed: Yes
Tile Size: Mosaics through larger-format tile
Material: Durable polymer
No scrap tile.
No cardboard.
No foam board.
No makeshift cutting surface.
Just a flat, supported cutting surface that's already there when you need it.
ZeroDeck™
Stop Fighting Mosaic Sheets.
Crowne Tools — For Pros. By Pros.
