Clean Sink Cutouts: Useful for getting the initial opening done accurately in many vanity top materials.
Precise Curves for Backsplashes: Handy for following patterns or fitting around fixtures where a clean, fine cut is needed.
Working with Delicate Tiles: Can be a good option for glass tile (wet cutting) or other materials prone to chipping, where its finer grit helps.
Outlet & Pipe Openings: For making accurate holes in tile for a neat fit.
Minor Edge De-burring: After a cut, can be used to quickly knock off a sharp tile edge.
Small Adjustments After Cutting: If a tile is just a hair too big after cutting, you might use the side for a very slight reduction.
Fitting Trim Pieces: Good for making the precise cuts needed for tile trim.
Main Jobs: Accurate Straight Cutting, Curve Cutting, Making Apertures/Openings. Very Light Edge Smoothing or Minor Adjustments after cutting.
Good For These Materials: Ceramic Tile, Porcelain Tile, Glass Tile (wet), Softer Natural Stones (e.g., some Marbles, Slate), some Engineered Stones.
Grit Action: The #60/70 electroplated grit is primarily for a clean, precise cut. Any "shaping" or material removal with the side is minimal and best for slight adjustments.
Wet or Dry Use: Works for both. Wet cutting is generally better for blade life and reducing dust, especially on harder or more delicate materials.
Design Benefit: The flush-mount design with flange helps when cutting close to edges or making through-cuts.
Important Note: This is not a dedicated grinding or shaping wheel. For significant material removal, beveling, or heavy shaping, use a specialized grinding disc. This blade excels at cutting with the option for very light side touch-ups
Blade Diameter: 5 inches (125mm)
Diamond Grit: #60/70 (Primarily for precise cutting; allows for very light abrasion on the side)
Coating Type: Electroplated Diamond
Design: Combination Continuous Rim Cutting Edge & Electroplated Face
Flange: Integrated 5/8"-11 Threaded Flange (for direct mounting to angle grinders)
Use: Wet & Dry Capable
Max RPM: 12,000 RPM
Intended Use: Precise cutting of lines, curves, and openings, with the capability for very minor edge smoothing or adjustments on compatible materials.
